Opens in a new tab

Regulatory & compliance · International household goods

International: Switzerland

Additional permits are required for non-EU/EFTA routes, and a distinctive heavy-vehicle charge applies to heavy goods vehicles operating in Switzerland. The CMR Convention excludes furniture removal, so domestic Code of Obligations liability continues to apply

Regulated byCross-border permits (bilateral Transportbewilligung, CEMT permits including a moving-specific CEMT-Umzugsgenehmigung) issued by the Bundesamt für Verkehr (BAV) for non-EU/EFTA routes; the Leistungsabhängige Schwerverkehrsabgabe (LSVA), a distance-based heavy-vehicle charge, applies to heavy goods vehicles operating in Switzerland; the CMR Convention, which Switzerland has ratified (though not its electronic protocol), excludes furniture removal from its scope, so domestic Code of Obligations liability continues to apply to genuine household-goods moves

At a glanceRequirements at a glance

EU/EFTA Routes Covered by the Domestic authorisation
Yes. As covered on the Switzerland page, the domestic Zulassungsbewilligung (formerly authorisation) already permits cross-border transport into the EU/EEA and other EFTA states under the bilateral Land Transport Agreement, without needing an additional permit for that traffic specifically. The authorisation and the permits below attach to the company operating the vehicles; where a mover subcontracts the road transport, the carrier’s own licences and permits cover the transport it performs.
Bilateral Transportbewilligung Required for Genuine Third Countries
Yes
Yes, where the mover operates its own vehicles on those routes. For routes to or from a country outside the EU/EFTA, a separate Transportbewilligung is required, issued under a bilateral agreement between Switzerland and that specific country. These arrangements are often reciprocal but asymmetric in practice: a Swiss carrier may need a permit issued by the destination country, while that country’s carriers need a Swiss-issued permit to operate in Switzerland.
CEMT Permits for Multilateral Third-Country Transport
Yes, where applicable. For transport through multiple countries within the CEMT zone (roughly 43 member countries), a CEMT permit is required: an annual permit (CHF 900) for regular multilateral transport, or a specifically named CEMT-Umzugsgenehmigung (CEMT moving permit, CHF 50). The moving permit is a distinct, moving-industry-specific category within the CEMT system, separate from the general annual permit.
CMR Does Not Cover Furniture Removal: Domestic Code of Obligations Liability Continues to Apply
Switzerland is a contracting state to the CMR Convention, and CMR generally governs international road carriage. However, Article 1(4)(c) of the Convention excludes furniture removal from its scope, as confirmed in the Convention’s own text and by UNIDROIT (its custodian body). A genuine international household-goods move therefore does not fall under CMR liability terms; domestic Code of Obligations liability (covered on the Switzerland page) continues to apply by default.
Switzerland Has Not Ratified the e-CMR Protocol
Correct. Unlike Germany, France, and the Netherlands, Switzerland has not ratified the electronic CMR (e-CMR) protocol. This is a general fact about Switzerland’s transport-law landscape relevant to general freight carriage. Since CMR itself does not cover furniture removal, this ratification gap does not directly affect a household mover’s core liability question.
LSVA (Heavy Vehicle Charge) Applies to Heavy Goods Vehicles
Yes, where the mover operates its own heavy goods vehicles in Switzerland. Heavy goods vehicles operating in Switzerland, domestic or foreign-registered, are subject to the Leistungsabhängige Schwerverkehrsabgabe, a distance-based charge. Trucks are registered with the Federal Office for Customs and Border Security (BAZG), and kilometres are recorded by an approved NETS or EETS on-board system; the old on-board units were phased out by the end of 2025. This is a registration and equipment requirement distinct from the authorisation itself.

OverviewOverview & Scope

International relocations involving Switzerland build on the domestic Zulassungsbewilligung (formerly authorisation) covered on the Switzerland page, which already extends to EU/EEA and EFTA cross-border work under the bilateral Land Transport Agreement. Genuine third-country routes require additional permits: a bilateral Transportbewilligung for a specific country, or a CEMT permit for multilateral transport across the CEMT zone, including a distinct, moving-industry-specific CEMT-Umzugsgenehmigung. Separately, any truck over 3.5 tonnes operating in Switzerland, regardless of registration, is subject to the LSVA, a distance-based heavy-vehicle charge requiring an onboard unit. These permits and the LSVA attach to the company operating the vehicles; where a mover subcontracts the road transport, the carrier’s own permits cover the transport it performs, and the mover uses carriers that hold them. On liability, domestic Code of Obligations liability continues to apply by default to genuine international furniture-removal moves, because CMR excludes furniture removal from its scope even though Switzerland has ratified it. Switzerland’s separate non-ratification of the electronic CMR protocol is a real fact about its transport-law landscape generally, but it does not change which regime applies to a household move.

RegistrationRegistration & Compliance Essentials

Movers that carry goods across borders by road in their own vehicles must:

  1. Hold the domestic Zulassungsbewilligung (formerly authorisation), which covers EU/EEA and EFTA routes under the Land Transport Agreement.
  2. Obtain a bilateral Transportbewilligung for routes to or from a genuine third country outside the EU/EFTA, confirming the specific reciprocal arrangement with that country.
  3. Obtain a CEMT permit (the annual permit or the specific CEMT-Umzugsgenehmigung) for multilateral transport across the CEMT zone.
  4. Register with the BAZG for the LSVA and record kilometres with an approved NETS or EETS on-board system for any heavy goods vehicle operating in Switzerland.

Movers that subcontract the road transport must:

  1. Use carriers that hold the licences required for the transport they perform.

ChecklistCompliance checklist

Company licensing

  • Business entered in the commercial register (Handelsregister)Where applicable (company, or sole proprietorship with annual turnover of CHF 100,000 or more)Verified by DocumentRequired
  • Swiss Zulassungsbewilligung (road transport undertaking licence, formerly authorisation) held, covering EU/EEA and EFTA cross-border routes under the Land Transport AgreementWhere applicable (mover operates its own vehicles on cross-border road moves)Verified by DocumentRequired
  • Bilateral Transportbewilligung obtained for each genuine third-country routeWhere applicable (mover operates its own vehicles to or from a country outside the EU/EFTA)Verified by DocumentRequired
  • CEMT permit (annual or CEMT-Umzugsgenehmigung) obtainedWhere applicable (mover operates its own vehicles on multilateral transport across the CEMT zone)Verified by DocumentRequired

Subcontracted transport

  • Where transport or other services are subcontracted, the mover uses suppliers that hold the licences and insurance required by law for the work they performWhere applicableVerified by AffirmationRequired
  • Road transport undertakings commissioned only where the carriage complies with the licence, driver attestation and cabotage rules (STUG art. 8a)Where applicable (mover commissions road transport undertakings to carry goods)Verified by AffirmationRequired

Vehicles and drivers (where the mover operates its own vehicles)

  • Certified copy of the Zulassungsbewilligung carried on each vehicleWhere applicable (mover operates its own vehicles on cross-border road moves)Verified by DocumentRequired
  • Registered with the Federal Office for Customs and Border Security (BAZG) for the heavy vehicle charge (LSVA), with kilometres recorded by an approved on-board system (NETS or EETS provider)Where applicable (mover operates its own trucks subject to the heavy vehicle charge)Verified by DocumentRequired

Insurance and social security

  • Employees insured against accidents under the Accident Insurance Act (UVG), with transport businesses insured through SuvaWhere applicable (mover has employees)Verified by DocumentRequired
  • Motor vehicle liability insurance in force for each vehicleWhere applicable (mover operates its own vehicles)Verified by DocumentRequired

Last updated
October 30, 2026

Licensing & Compliance · Switzerland

Other move types

Within Switzerland
A national Zulassungsbewilligung (formerly Lizenz) issued by the BAV to the company operating the vehicles, based on the same reliability, financial-standing and professional-competence framework used across the EU.
International
For routes outside the EU/EFTA, bilateral permits or a moving-specific CEMT permit, plus a distinctive heavy-vehicle charge. The CMR Convention excludes furniture removal, so Code of Obligations liability continues to apply.
You are here
Draft — this site is under review. Please do not use or circulate.